electromagnetic-flowmeter-1.png

Electromagnetic Flowmeter

Data Sheet

Repair Service

 

SPECIFICATION
 
 

 

Excitation: Keypad:
DC pulsed 3 external keys for programming 
Display: and display control
3 lines LCD with illumination Data Storage:
Line 1 Operation parameters and totalizer
11 digit totalizer for forward flow figures are stored by EEPROM for more
11 digit totalizer for reverse flow than 10 years
11 digit totalizer for difference Low Flow Cutoff:
Line 2 0 to 9.9 %
5 digit flowrate / velocity / % / mA / HZ Damping:
Line 3 0 to 99 Seconds
Parameter / Query / Clr tot / Query LOG Density Setting:
Alarm, Guidance 0.1 to 9.99 g/cm3
Totalizer Unit Self Diagnosis:
T, Kg, g, lb, Ston, Lton, m3, L, mL, lgal, gal, The following error message are 
Mgal, bbl, fr3, a-ft displayed if failure occurs
Time Unit - Coil failure
sec, min, hour, day - Power failure
Measuring Range: - Overranged output
Min.  0 to 0.15 m/s - Internal error
Max. 0 to 15 m/s - Overflow
Accuracy: - Empty pipe
+/-0.4% of reading (Velocity >= 0.5 m/s) Cable Entry:
+/-0.002 m/s (Velocity < 0.5 m/s) Standard :PG11 Option:1/2"NPTF
Repeatability: Protection Class:
+/-0.1% of reading IP 65
Current Output: Ambient Temperature:
4-20 mA (Isolated) -25 to +65 oC
Load Material:
Max. 600  Aluminum Alloy
Pulse Output: Power Supply:
Open collector 90-260 VAC, 50/60 Hz
Rating 24VDC +/-10% (Option)
3 to 30 VDC, 20 mA Max.  Power Consumption:
Pulse Rate: 3-17 W (Dependent on sensor size)
1)Scale pulse (Pusle/mL, Pulse/L, Other) Weight:
2)Frequency: 0-5000 Hz 1.4 Kg
Pulse Width: Mounting:
50% of band width Wall mounting
Alarm: Bracket on 2" pipe
High/Low with open collector output  
Rating  
3 to 30 VDC, 20 mA Max.   
Communication:  
RS485 (MODBUS Protocol)  
HART signal (Compatible)