profinet-ethernet-ip-converter-s7comm-ethernet-ip-converter-vietnam.png

 PROFINET / EtherNet/IP - Converter
S7comm / EtherNet/IP - Converter Vietnam

This serie of products allows to integrate a PROFINET network with an EtherNet/IP net.
In case of Siemens PLCs (or equivalent), it is possible to use S7comm protocol to get and set data into them from a EtherNet/IP net. S7comm protocol is a Siemens protocol: this protocol is very good if it is necessary to get and set data from/to the PLC without changing the configuration of the PLC itself. This protocol will work as a debug protocol and the automation below the PLC will continue to work without any interferance.


The HD67660 is a PROFINET / EtherNet/IP Converter and it allows you to connect a PROFINET net (for example a SIEMENS PLC...) with an EtherNet/IP net (for example an Allen-Bradley PLC...) in order to exchange the informations between the networks.


The HD67B78 is a PROFINET Master / EtherNet/IP Converter and it allows you to connect a PROFINET net with an EtherNet/IP net Master (for example an Allen-Bradley PLC...) in order to exchange the informations between the networks.


The HD67661 is a PROFINET / EtherNet/IP Master Converter and it allows you to connect a PROFINET net (for example a SIEMENS PLC...) with some EtherNet/IP devices (for example Encoder, I/O...) in order to exchange the informations between the networks.


In all devices are installed 2 LAN ports with RJ45 connectors that allow you to not use an external switch.












The HD67627 is a S7comm / EtherNet/IP Converter and it allows you to connect an EtherNet/IP Master (for example an Allen-Bradley, a Omron PLC, ...) with a Siemens PLC (or equivalent) in order to exchange the informations between the networks without changing the configuration and stopping the automation of the PLC.