safety-solenoid-valves-for-air-and-gas-fast-opening-and-fast-closing-type.png

Safety solenoid valves for air and gas, fast opening and fast closing type

Technical Sheet

Repair Service

 

The VMR type valve is a fast opening solenoid valve that is normally closed.

When the coil is not energized the spring works on the disc keeping the gas passage closed. When the coil is powered the valve opens. When power is switched off the valve rapidly shuts.

This type of device is suitable for gas and air blocking and adjusting controls in atmospheric burners or fan-assisted burners, in industrial kilns and in all gas equipments which use gas solenoid valves (qualified for continuous service – 100% ED). Suitable for high-frequency switching systems.

CE approved EN 161
FM approved
EAC approved

Material/Connections

CuZn Rp1/4 … Rp1/2
AlSi Rp3/8 … Rp2½
AlSi DN40 … DN150

Operating pressure

0 ... 200 mbar
0 ... 360 mbar
0 ... 500 mbar
0 … 6 bar

Gas type

Air and non-aggressive gases (Family 1-2-3, EN 437)
Special version for Biogas/COG

Approvals

CE approved EN 161 – FM approved – EAC approved