
T6100 Fairchild Vietnam
Industrial Process Transducers
The Process Control line of I/P Transducers utilizes a flapper and nozzle attached to a voice coil to proportionally regulate the output pressure. The Fairchild T5200, T5400, T5700 and T6000 pressure transducer series offer dependable performance at economical prices. The new T6100 I/P unit also offers “Lock in Last Place” reliability in an easy to use product configuration.
Lock in Place I/P Pressure Transducers _Model T6100_Fairchild Vietnam
Features
|
Benefits
|

Uniquely designed by Fairchild, the T6100 "Lock in Last Place" I/P pressure transducer provides flexibility, reliability and safety in applications requiring protection from signal failures to critical control system instruments. Its simple yet effective voice coil actuation now Locks in "Last Position" to accurately capture the setpoint with extremely low drift after a power loss permits the T6100 to maintain set point. The unit's IP65 rating allows you to handle moist applications with ease. Design of the T6100 relies on a proprietary integrated solenoid valve module interposed between the flapper-nozzle pilot and the booster section. Upon signal failure, an electrical charge stored within the active electronic circuit controlling the integrated solenoid valve module maintains the current to the voice coil at its last setpoint. Simultaneously, a high energy pulse closes the solenoid valve, trapping the signal pressure within the signal chamber at the last setpoint. The booster continues to provide its normal forward and exhaust flow, with the constant signal pressure now captured and maintained within the signal chamber. Advanced valve orifice design of the T6100 increases its forward flow capacity to a minimum of 5-scfm at 21-psig supply pressure.
Fast Response E/P, I/P Pressure Transducers Model T5200_Fairchild Vietnam
Features
|
Benefits
|

Rotork Fairchild's T5200 Transducer is a Fast Response I/P, E/P Transducer controlled by a 4-20 mA current in a control loop. With its reliable signal conversion and pneumatic circuit sections, the T5200 I/P Transducer provides fast response to input signal changes, resulting in faster loop control and savings in process materials. The Signal Conversion Section (PC Board) accepts a 4-20 mA current from the control loop. This signal current is applied to a coil which creates a magnetic force that moves a Flexure Arm. The Pneumatic Section operates as a force balance system. A Sapphire Ball floats inside a Nozzle and controls the output pressure by exhausting air supplied through an Orifice. This Sapphire Ball acts as a piston exerting a force which is balanced against the force of the Flexure Arm. Its minimal air consumption allows you to use the T5200 in systems where operating gas is expensive. Five available input signal ranges deliver the versatility to meet most process and machine requirements. These available inputs are 1-5 mA, 4-20 mA, 10-50 mA, 1-5 VDC and 1-9 VDC, each with the corresponding output range of 3-15 psig, [0.2-1.0 BAR], (20-100 kPa).
Fast Response High Flow E/P, I/P Pressure Transducers Model T5220_Fairchild Vietnam
Features
|
Benefits
|

As a Fast Response High Flow I/P, E/P Transducer, the Fairchild T5220 has all the performance you want in a voice coil I/P transducer product, but it also includes a built in booster section to deliver high flow capacity, up to 45 SCFM (76.5 m3/HR) with six available rations to allow pressure multiplication to the output. This feature, along with the adjustable positive and negative bias allows you to custom design your control system for exactly the desired performance. The Signal Conversion Section (PC Board) accepts a DC current or voltage. This signal is applied to a coil which creates a magnetic force that moves a Flexure Arm. The Pneumatic Section operates as a force balance system. A Sapphire Ball floats inside a Nozzle and controls the output pressure by exhausting air supplied through an Orifice. This Sapphire Ball acts as a piston exerting a force which is balanced against the force transferred to the Flexure Arm by the Coil. The Booster Section amplifies the output pressure of the transducer